Setting Modem Smart Haier D1200P di Ubuntu 9.04 Jaunty Jackalope

Smart Haier D1200P

Berhubung banyak sekali para pengguna Modem Smart Haier D1200P yang sulit terkoneksi di Ubuntu 9.04 Jaunty Jackalope. Iseng-iseng saya mencari-cari di google dan ketemulah saya setting yang kunanti-nantikan tersebut.

SAYA BERHASIL mencoba trik dan tips yang diberikan, mudah-mudahan cara ini bisa sedikit membantu bagi para Smarter yang ingin terkoneksi dengan Ubuntu. Berikut ini caranya:

1. Edit lah menu.lst Anda: ohdediku@wordpress:~$ sudo gedit /boot/grub/menu.lst sesudah itu cari baris berikut:

## ## End Default Options ##

title        Ubuntu 9.04, kernel 2.6.28-11-generic
uuid        593c8ece-2c78-45d4-b014-140376bab2dd
kernel        /boot/vmlinuz-2.6.28-11-generic root=UUID=593c8ece-2c78-45d4b014-140376bab2dd ro quiet splash
initrd        /boot/initrd.img-2.6.28-11-generic
quiet

Lalu edit Opsi diatas hingga menjadi seperti berikut ini:

## ## End Default Options ##

title        Ubuntu 9.04, kernel 2.6.28-11-generic with usbserial
uuid        593c8ece-2c78-45d4-b014-140376bab2dd
kernel        /boot/vmlinuz-2.6.28-11-generic root=UUID=593c8ece-2c78-45d4b014-140376bab2dd ro quiet splash usbserial.vendor=0x15eb usbserial.product=0x0001
initrd        /boot/initrd.img-2.6.28-11-generic
quiet

Sesudah itu SAVE.

Lalu kita akan meluncur untuk mengedit wvdial:
(Sebelumnya INSTALL dulu wvdial nya, karena Ubuntu Jaunty Jackalope belum menyertakan didalamnya).

ohdediku@wordpress:~$ sudo gedit /etc/wvdial.conf
Lalu tambahkan script ini kedalamnya:

[Dialer smart]

Modem = /dev/ttyUSB0
Baud = 115200
Init1 = AT+CRM=1; +CMUX=1; +CPS=33; +CTA=0
Init2 =
Init3 =
Area Code =
Phone = #777
Username =smart
Password =smart
Ask Password = 0
Dial Command = ATDT
Stupid Mode = 1
Compuserve = 0
Force Address =
Idle Seconds = 300
DialMessage1 =
DialMessage2 =
ISDN = 0
Auto DNS = 1

Masih ada 1 langkah lagi, supaya koneksi tidak putus di tengah jalan:

ohdediku@wordpress:~$ sudo gedit /etc/ppp/options

Tambahkan script berikut didalamnya (hapus saja script yang masih ada didalamnya)

asyncmap
0
noauth
crtscts
modem
proxyarp
noipx
persist
idle
1000000

Untuk meng Connectkan modem, tinggal:

ohdediku@wordpress:~$ sudo wvdial smart

Jika berhasil akan muncul baris beikut:

--> WvDial: Internet dialer version 1.60
--> Cannot get information for serial port.
--> Initializing modem.
--> Sending: AT+CRM=1; +CMUX=1; +CPS=33; +CTA=0
AT+CRM=1; +CMUX=1; +CPS=33; +CTA=0
OK
--> Modem initialized.
--> Idle Seconds = 300, disabling automatic reconnect.
--> Sending: ATDT#777
--> Waiting for carrier.
ATDT#777
CONNECT
--> Carrier detected.  Starting PPP immediately.
--> Starting pppd at Sun Jun  7 11:19:27 2009
--> Pid of pppd: 3221
--> Using interface ppp0
--> pppd: �X�
--> pppd: �X�
--> pppd: �X�
--> pppd: �X�
--> pppd: �X�

Selamat Anda sudah berhasil ber Smart-smart ria di Ubuntu Jaunty Jackalope…
Jika masih kesulitan, hubungi saia saja….:D

136 Responses to “Setting Modem Smart Haier D1200P di Ubuntu 9.04 Jaunty Jackalope”

  1. WANDI thok Says:

    Wow, bisa pertamax

    • ohdediku Says:

      hhhaa…….
      sering2 mampir n koment ya mas….🙂

  2. alwie Says:

    saya dah nyoba kok gagal ya??? pa ada yg telah nyoba n berhasil???

    • ohdediku Says:

      Mungkin gagal nya dmn?

      Semangat mas,,
      Saya dah berhasil tuh…

  3. udien Says:

    GATOT (gagal total) alias gag jalan

    • ohdediku Says:

      Mungkin revisi tulisan saya bisa membantu….
      saya sudah mencobanya dan berhasil…..

  4. bawor Says:

    habis nulis di menu.lst, ga bisa save…kl pake sudo nano… di title nya di isi apa…?

    • ohdediku Says:

      untuk mengedit di menu.lst kita harus masuk ke mode root.

      Ex:
      ohdediku@wordpress:~$ sudo su
      [sudo] password for ohdediku:
      root@wordpress:/home/ohdediku# sudo gedit /boot/grub/menu.lst

  5. dhany Says:

    mas,,
    uuid yg di menu.lst itu apa harus itu nomornya?
    tiap PC ato laptop apakah sama?
    trima kasih mas,,

    • ohdediku Says:

      Saya tidak tahu mengapa koment Anda
      masuk SPAM….😀

      Nomornya jangan di samain, yang disamain
      cuma yang saya kasih huruf tebal saja…
      yang lainnya menyesuaikan…

      tiap PC pasti beda mas…

      Kembali mas…

  6. kehidupandigital Says:

    tty0 ga kedetek mas. gmana crnya. smwA ud d lkuin

    • ohdediku Says:

      Yakin udah di ikutin….
      wah py yo..hhe
      bukane yg keluar tuh ttyUSB0

  7. bawor Says:

    itu setelah opsi di rubah dan di save, perlu logout dulu ga …..?

    • ohdediku Says:

      Kalau saya tidak perlu…
      asal semua sudah sesuai prosedur dan modem posisi “normal”,
      tinggal restart dan tinggal menjalankan perintah wvdial~nya…..
      inget tidak pakai pon ya….

  8. bawor Says:

    ttyUSB0 nya ga bisa ke buka

    • ohdediku Says:

      bisa di lihat pesan error~nya gmn??

  9. bawor Says:

    pesan :
    root@onoy:~# sudo wvdial smart
    >WvDial: Internet dialer version 1.60
    >Cannot open /dev/ttyUSB0: No such file or directory
    >Cannot open /dev/ttyUSB0: No such file or directory
    >Cannot open /dev/ttyUSB0: No such file or directory
    maksudnya..?saya coba pake gnome ppp…tapi ttyUSB0 ga ada di daftar modemnya…mohon pencerahannya

    thax

    • ohdediku Says:

      Maksudnya tuh modem tidak terdeteksi di ttyUSB0…
      Sebelumnya, mas tidak menggunakan fungsi pon ya??
      soale kemarin kalau saya menggunakan fungsi pon ,
      kemudian panggil wvdial kejadiaanya jg begini…..😀
      Semangat terus mas..

  10. bawor Says:

    itu yang punya mas bisa berhasil di gimanain…?

  11. dhany Says:

    waduh mas,,
    saya gak tau kalo komennya termasuk spam🙂
    hehehe,,

    dulu pernah saya coba uuidnya sesuai dengan laptop saya,,
    tapi hasilnya tetep gak bisa,,

    ntr saya coba lagi,,

    • ohdediku Says:

      Sumpeh,
      saya juga ndak tau mas….🙂

      Semangat mas….
      dah banyak yg bs kok???
      mungkin belum beruntung saja…😀

  12. endar Says:

    bookmark dulu deh… makasih mas

    • ohdediku Says:

      Silahken….
      disebar-sebarken jg boleh….
      Sangat-sangat di anjurkan mas,
      dibawah lisensi GPL….halah

  13. ali Says:

    bagaimana Kalau huawei E220 dengan kartu matrix.thx

    • ohdediku Says:

      Sebenarnya sama mas kinerjanya…
      “mungkin” yang perlu di edit tuh di wvdial.conf nya….
      username, passwd dsb (tinggal menyesuaikan saja)…🙂

  14. drico Says:

    jika ada yang g kedetek ttyUSB0 coba ganti tulisan di menu list
    usbserial.vendor=0×15eb usbserial.product=0×0001

    ganti huruf x kecil dengan huruf besar sehingga menjadi
    usbserial.vendor=0X15eb usbserial.product=0X0001

    tp sy ada masalah mozilla tetap offline, jd g bisa browsing hanya untuk download update-an aja, knp ya?

    • ohdediku Says:

      Sedikit menambahkan, jika Anda semua bingung dengan
      pembacaan letak modem kita mungkin bisa dicoba cara berikut:

      ohdediku@wordpress:~$ sudo wvdialconf /etc/wvdial.conf

      Sudah bisa kan mas firefoxnya, dari menu FILE ===> Hilangkan Centang di Work Offline….🙂

      Terima kasih sudah mampir….

  15. Goon Says:

    mas, diatas katanya di suruh buat install wvdial, gimana caranya?? aku newbie banget nih…

    install wvdial ga pake internet kan?? coz ini aja baru mau disetting…

    • ohdediku Says:

      Salah satu kekecewaan saya terhadap Ubuntu 9.04 Jaunty Jackalope
      adalah TIDAK disertakannya wvdial di dalamnya…
      Solusi termudahnya adalah mendownload wvdial.
      Dari terminal, ketikan:

      ohdediku@wordpress:~$ sudo apt-get install wvdial

      Kalau limit bandwith mendingan pakai DVD Repository (Pengertiannya bisa di lihat di postingan terdahulu)…

      Semoga membantu…

  16. drico Says:

    mas, klo mo konek lsg g harus d pancing dr windws gmana caranya?

    • ohdediku Says:

      Untuk sementara ini “belum” bisa mas…

    • endarfitrianto Says:

      sudahkah ada yang menemukan mantra agar tidak mancing dari win?
      saya sudah nggak putus lagi bisa dipakai berjam-jam bahkan berhari-hari tanpa henti. tapi masih harus mancing
      makasih mas

  17. febi Says:

    mas ikutan donk,
    kalo PC saya sepeknya
    AMD athlon 1.6 GHZ
    ram 512
    vga on board s3
    mother board elite L7vMM3
    bisa pake ubuntu g y?????
    tolong bantu>>>>

    • ohdediku Says:

      Wah, sangat bisa mas..
      untuk ukuran Ubuntu yang keluaran baru 9.04
      minimal memory 254 (tanpa effect Compiz)…
      tapi segitu dah cukup kok…

      btw, dah punya masternya lum…
      aku masih ada stock nih (Gratiss)…😀

      • NurElly Says:

        Bener gratis bisa pesen via pos email mas apa

        • ohdediku Says:

          Apanya mass yg Gratisss…

  18. Goon Says:

    berhasil koneksi, bisa pake pon maupun wvdial, tp kembali muncul masalah nih, mas… koneksi ku dulu bisa kuat sampe berjam-jam… tp knp skr cuma bisa kurang dari 30menit yah… dan itupun kalo mau konek lagi harus dipancing dari Windows XP…

    ada solusi ga buat masalahku ini??

    • ohdediku Says:

      Congrat……😀

      Sudah di edit belum etc/ppp/options nya….
      Hapus ajah semua dan isikan dengan yang berikut, atau pastikan hanya opsi opsi berikut yang ada di /etc/ppp/options

      asyncmap 0 noauth crtscts modem proxyarp noipx persist idle 1000000

      • Goon Says:

        udah mas.. (kalo ga salah, hehe…)… kalo defaultnya kan mreka :
        1. asyncmap 0
        2. noauth
        3. crtscts
        4. modem
        5. proxyarp
        6. noipx
        coz udah aktif…,
        tp yg prlu di edit cuma:
        # persist –jadi–> persist (di ilangin tanda #);
        # idle –jadi–> idle 1000000 (diilangin tanda ‘#’ & ‘ di ganti jadi 1000000

        bukan begitu bukan?? CMIIW.. kalo yg itu udah…

        • ohdediku Says:

          Percaya tidak?? Ubuntu dengan modem SMART ini 2 minggu nggak pernah mati di PC saya….
          nggak ada problem tuh mati2 di tengah jalan, sumpeehh…..
          coba mas yang opsi nya di hapus semua, terus tulis perintahnya yang saya
          kasih dalam 1 baris….Good Luck…

          • endar Says:

            percaya mas.. saya juga nggak pernah macet tapi itu lho mancingnya hehehe

  19. darie Says:

    Oke bos makasih udah ber hasil…tapi ada beberapa tambahan.. perintah yang diatas gak bisa jalan di ubunutku seperti sudo gedit/etc/wvdial.conf maka saya lewat jalan buka manual gedit baru kemudian cari wvdial kemudian baru aku simpan…ya mungkin bagi temen2 yang belum bisa jalan perintah yang seperti diatas bisa pakai cara yang saya lakukan..aku muat dalam blogku ya.

    • ohdediku Says:

      Pantesan gak jalan kan salah tuh mas perintahnya….
      sudo gedit(spasi)/etc/wvdial.conf…

      Siiip….siiipp….

  20. assassindirectory Says:

    Sebelumnya terima kasih udah ada yg mau buat postingan ini….

    masalah saya sama seperti comment sebelumnya…
    root@onoy:~# sudo wvdial smart
    >WvDial: Internet dialer version 1.60
    >Cannot open /dev/ttyUSB0: No such file or directory
    >Cannot open /dev/ttyUSB0: No such file or directory
    >Cannot open /dev/ttyUSB0: No such file or directory

    Artinya nga kedetek di ttyUSB0… trus solusinya gmn… trus maksudnya fungsi pon..? itu sendiri apa …

    • ohdediku Says:

      Saya tidak tahu kok komentar mas masuk SPAM yah…🙂

      sebelumnya sudah sesuai prosedur belum mas…
      coba dengan perintah sudo wvdialconf /etc/wvdial.conf,
      biasanya akan kelihatan di dev mana modem tsb…

  21. ari Says:

    kalo buat modem seperti zte300 bisa ndak ya?

    • ohdediku Says:

      wah belum coba mas…
      mungkin garis besarnya sama….
      dicoba…dicoba…dan dicoba sajah….halah😀

  22. Jumain Says:

    Mastu Jan Baru Terjun NIch di Jaunty Jacklaope??/ dan baru dapat smart modem??/ Sya Coba dulu Yach??/

    • ohdediku Says:

      Monggo di coba tutor nya,
      moga berhasil mas….
      Gud Luck…Gud Luck…😀

  23. Jempolkakisaya Says:

    Terima kasih banyak mas tutornya….

    alhamdulillah saya dah online sekarang pake ubuntu yang jaunty…:D

    • ohdediku Says:

      Alhamdulillahhhhh……..
      Semangat terus mas….🙂

  24. ko2 Says:

    klo liat dr step’nya kayaknya gak mungkin berhasil deh, soalnya di ubuntu 9.04 wvdial’nya gak ada kan????harus instal dulu?????aku coba settingan persis diatas senada dgn yg lain GATOT.

    • ohdediku Says:

      Pasti mas nggak baca keseluruhannya….🙂
      dah banyak yg berhasil loo….

  25. raga Says:

    mas aq koq kluar yang beginian ya
    orenz@My-Own-Live-laptop:~$ sudo wvdial smart
    –> WvDial: Internet dialer version 1.60
    –> Warning: section [Dialer smart] does not exist in wvdial.conf.
    –> Cannot open /dev/modem: No such file or directory
    –> Cannot open /dev/modem: No such file or directory
    –> Cannot open /dev/modem: No such file or directory

    • ohdediku Says:

      Coba mas dibaca pelan-pelan sing penting kelakon…
      dah banyak yg bewrhasil kok….
      baca juga mas komentar-komentar yang masukk….
      Selamat mencoba🙂

  26. raga Says:

    mas aq koq kluar yang beginian ya

    orenz@My-Own-Live-laptop:~$ sudo wvdial smart
    –> WvDial: Internet dialer version 1.60
    –> Warning: section [Dialer smart] does not exist in wvdial.conf.
    –> Cannot open /dev/modem: No such file or directory
    –> Cannot open /dev/modem: No such file or directory
    –> Cannot open /dev/modem: No such file or directory

    modemnya ga kebaca atu gimana nih??

  27. yuli irawan Says:

    Mas Dedi, ketika masuk ke sudo gedit /boot/grup/menu.lst,ngga mau Mas. Di monitor disebutkan,cannot display,jadi hanya ada layar kosong. kalau gedit/etc/ppp/options bisa tampil teksnya. Bagaimana ini ya Mas? TQ

    • ohdediku Says:

      grup vs grub
      Sudah khan mas…🙂

  28. angga Says:

    mas tolong kirim aq email mengenai setting modem cdma smart d1200p di bagian connection settingnya menggunakan windows Vista. thanks

    • ohdediku Says:

      Wah sory Gan….
      lum pernah megang Vista e…
      Ubuntu saja…😀

  29. Jerry Says:

    Gan gw masih blon bisa konek neeh, pertama muncul

    Cannot open /dev/modem: No such file or directory

    Trus udah edit usbserial.vendor=0×15eb usbserial.product=0×0001, x di ganti X dan hasilnya :

    jerry@jtux:~$ sudo wvdial smart
    [sudo] password for jerry:
    –> WvDial: Internet dialer version 1.60
    –> Cannot get information for serial port.
    –> Initializing modem.
    –> Sending: AT+CRM=1; +CMUX=1; +CPS=33; +CTA=0
    –> Sending: ATQ0
    –> Re-Sending: AT+CRM=1; +CMUX=1; +CPS=33; +CTA=0
    –> Modem not responding.
    jerry@jtux:~$

    Kalo gw jalanin sudo wvdialconf /etc/wvdial.conf hasilnya :

    jerry@jtux:~$ sudo wvdialconf /etc/wvdial.conf
    Editing `/etc/wvdial.conf’.

    Scanning your serial ports for a modem.

    Modem Port Scan: S0 S1 S2 S3
    WvModem: Cannot get information for serial port.
    ttyUSB0: ATQ0 V1 E1 — failed with 2400 baud, next try: 9600 baud
    ttyUSB0: ATQ0 V1 E1 — failed with 9600 baud, next try: 9600 baud
    ttyUSB0: ATQ0 V1 E1 — and failed too at 115200, giving up.
    WvModem: Cannot get information for serial port.
    ttyUSB1: ATQ0 V1 E1 — �ܺ�[0e]
    ttyUSB1: failed with 2400 baud, next try: 9600 baud
    ttyUSB1: ATQ0 V1 E1 — failed with 9600 baud, next try: 9600 baud
    ttyUSB1: ATQ0 V1 E1 — and failed too at 115200, giving up.

    Menurut nt apa problemnya neeh, apa kemungkinan ttyUSB0 yg belum konek ma modem… Oh ya satu lagi….
    maksud nt koneknya di pancing ma windows tu gimana kaga ngerti euy.

  30. jerry Says:

    Bro skrg udah bisa, usbserial.vendor=0×15eb usbserial.product=0×0001, tetep kayak gini, trus /etc/wvdial.conf gw rubah jadi :

    [Dialer Defaults]
    Init1 = ATZ
    Init2 = ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
    Init3 = at+crm=1;+cmux=1;+cps=33;+cta=0
    Modem Type = Analog Modem
    ISDN = 0
    Phone = #777
    Modem = /dev/ttyUSB0
    Username =smart
    Password =smart
    Baud = 460800
    Stupid Mode = 1

    Btw thx banget ya…

    • ohdediku Says:

      Selamat ya Gan..
      [ikut.seneng mode=auto]😀

  31. Ichsan Says:

    makasih byk ya mas… !!!
    saya udah bisa connect’in smart pakai Ubuntu…. neeh skrg saya Posting’nya pake Ubuntu…😀😀😀
    Oh iy,! trus klo mw disconnect’innya gmn mas?? :hammer:

    • ohdediku Says:

      wah ikut seneng juga nih Gan…..
      seylamat…seylaamat…..
      .
      untuk disconet cuma tekan CTRL+C

  32. Ichsan Says:

    Jah, Gan… skrg saya mw connect’in lagi kok gak bisa??!
    tulisannya “modem not responding”
    knp tuh Gan?
    apa harus di pancing di wind*ws dlu Gan??
    bantuin y Gan… :beer: :beer:😀

    • ohdediku Says:

      Coba modemnya di koneksikan dulu di Wendows,
      terus di diskonet..
      baru itu di koneksikan ke Ubuntu😀

      • Ichsan Says:

        oh iya Gan… dah bisa…!
        tapi masa harus di pancing dulu di Windows…..
        Juragan blm punya cara ngakalinnya ya?! biar gak sah di pancing di windows…?!

        • ohdediku Says:

          Dulu pernah coba install VB di Ubuntu,
          bisa konek di windows tp gak bisa dipake di Ubuntu…
          [yaaahh…sama saja]

          untuk saat ini belum mas…
          mgkn, kalo mas sudah nemuin share-share sini…😀

          • Ichsan Says:

            Oooo… Gtu.. y udah,, makasih y mas…!

            • ohdediku Says:

              Kembali Gan…
              Jangan lupa kpan2 balik maning ning Blog ku…. [halah]

  33. manda Says:

    mas kalo di ubuntu 9.04 masih harus di pancing di windows dulu gak? soalnya aq masih pake xubuntu 8.04.
    aq punya teori nih ttg mancing modem haier d1200p di linux tapi belum pernah di coba soalnya ga ada space hardis ditambah aq ga ngerti terlalu banyak ttg linux jadi hanya bisa berteori. caranya install qemu dan reactos(versi open-sourcenya windows) trus insall drivernya di reactos, jadi kalo mau start tinggal di aktifin di reactos baru connect pake wvdial… kalo ada yang berminat mencoba ditunggu hasilnya ya…
    trus kenapa di forum ini:(http://www.linuxquestions.org/questions/linux-hardware-18/help-me-to-install-cds4-cdma-modem-716307/) dibilang kalo modem dengan chip VIA bermasalah sama processor AMD.. sapa tau aja juragan tau kenapa bisa begitu…

    • ohdediku Says:

      Saran yang bagus mbak….
      tetapi kayaknya gak berhasil deh soalnya gak usah install ReactOS,
      install Windows saja yg benar2 di support ma nih modem
      kalo cuma lewat Virtual Machine (VBOX, QEMU, VMware) gak bakalan berhasil
      soalnya saya sendiri sudah coba….🙂

      • yoyok Says:

        weleh… kemaren2 ane baca komen2 gak sampek bawah..
        ternyata mas udah coba mancing pake virtual machine ya…
        kemaren ane nyoba mancing pake windows di vbox kagak berhasil2 hehehe
        klo tau mas udah nyoba dan kagak berhasil mending kemaren sekalian ane gak usah nyoba.. huhuhu

  34. chevy Says:

    mas kalo Ubuntu 9.04 dengan kernel 2.6.28-13-generic apakah settingannya sama gak yah, soalnya saya sudah coba sesuai prosedur, tapi blum sukses juga

    • ohdediku Says:

      lha itu saia dan temen2 bnyk yg bisa Gan….😀

  35. faizin Says:

    di ubuntu 9.04 kernel 2.6.28.11 berhasil bro

    tapi di sabily kernel 2.6.28.14 gagal

    gimna nih ?

  36. adang Says:

    klo udh konek,trs gmn cara diskoneknya??apa lngsung dicabut aja usb-nya??

    • ohdediku Says:

      CTRL+C Gan….

  37. high_anonymous Says:

    mas thank’s banget atas tutornya n buat temen2 yg dah comment juga makasih, kalo yang saya cobain, setingan di wvdial.conf yang mas tulis gak jalan di tempat saya, tapi kalo yang ini jalan

    [Dialer Defaults]
    Init1 = ATZ
    Init2 = ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
    Init3 = at+crm=1;+cmux=1;+cps=33;+cta=0
    Modem Type = Analog Modem
    ISDN = 0
    Phone = #777
    Modem = /dev/ttyUSB0
    Username =smart
    Password =smart
    Baud = 460800
    Stupid Mode = 1

    but makasih atas tutornya

    • ohdediku Says:

      Masama Gan….😀

  38. HackerMpia Says:

    Linuxnya Ubuntu kirim ke rumah saya bisa gratis gak katanya situ punya persediaan Linux ubuntu 9.04

    • ohdediku Says:

      coba pesen langsung dari shipit…
      gratiss kok..
      kalo punya saia dah abis Gan…🙂

  39. joni Says:

    bos settingan ini apa berlaku jika kita pake dual boot yah..terus mancing modemnya gimana ? apa setelah connect dr windows disconnect trus restart ke ubuntu yah baru connect via ubuntu yah …thx newbie

  40. drico Says:

    bro, gmana caranya konekin haier c700(modem s. pake perintah lsusb telah kedetek sbg qualcom inc.

  41. triat Says:

    work for me, thanks

  42. rizki Says:

    bos gmn caranya kalu konekin haier c700 di ubuntu 9.04

  43. Ronny Rianto Says:

    gimana caranya install wvdial. karena di komputer hanya berharap dari smart sebagai modem internetnya.

  44. Cahyo Says:

    Gan, semua udah bisa …tapi waktu aku coba connect ke

    sudo wvdial smart
    hasilnya

    sudo: wvdial : Comment not found

    Kenapa yaaa…???? salahnya dimana.???
    Mohon pencerahan….thx

    • ohdediku Says:

      wvdialnya blum ke install tuh gan .
      install dulu sudo apt-get install wvdial 🙂
      gud luk

  45. Cahyo Says:

    Errrornya kaya gini ga….
    waktu install wvdialnya : sudo apt-get install wvdial…..

    reading package list….Done
    Building dependency tree
    Reading state information…. Done
    you might want to run apt-get -f install to correct these :
    the following packages have unmet dependencies :
    libuniconF4,4: depends: libxpc0.3.13 but it is not going to be installed
    libwvstreams4.4-base: depends: Libxplc0.3.13 but it is not going to be installed
    libwvstreams4.4-extras: depends: Libxplc0.3.13 but it is not going to be installed
    Wvdial: Depends: Libxplc0.3.13 but it is not going to be installed
    E:Unmet depencies. Try ‘apt-get -f install’ with no packages (or specify a solution)

    Jadi musti gmn gan.??? udah coba ubek uncle google, tetep aja ga bisa…

    mohon pencarahan.???

    thx

    • ohdediku Says:

      ooo .
      itu mah paket nya konflik gan .
      coba dari terminal ketik sudo apt-get install -f

      abis itu install wvdial secara normal, sudo apt-get install wvdial .
      moga membantu gan … :beer:

  46. putra Says:

    mas nge-save menu.lst ke folder mana??? karena gw baru pertama kali nggunain ubuntu

    • ohdediku Says:

      maksudnya gimana gan? ngesavenya coba dalam modus root.🙂

  47. Deni Says:

    Hai semua…. mohon info dan bantuannya, untuk Hp Modem Heiher D1200p, apakan ada cara untuk menggunakan kartu dari operator CDMA lainnya ?
    Masalahnya, saya sudah gunakan Hp ini selama 8 bulan, awalnya tertarik karena bisa koneksi internet, katanya sich Oke, ternyata larinya kencang, se kencang “keong”, dan juga di beberapa daerah yang menjadi tempat ektifitas, sinyalnya kurang bagus.

    • ohdediku Says:

      Kayaknya ndak bisa gan,
      soalnya haier d1200p bekerja di frekuensi 1900mhz [kalo ndak salah]
      nah kebanyakan cdma di indonesia bekerja di frekuensi 800mhz.

      coba pakai wajan aja gan kalo sinyalnya naik turun.🙂

  48. cahyo Says:

    Gan, ane mentok ke tembok lage dehhhhh…..
    neh message errornya

    presario@presario-laptop:~$ sudo wvdial smart

    –> WvDial: Internet dialer version 1.60
    –> Warning: section [Dialer smart] does not exist in wvdial.conf.
    –> Cannot open /dev/modem: No such file or directory
    –> Cannot open /dev/modem: No such file or directory
    –> Cannot open /dev/modem: No such file or directory

    presario@presario-laptop:~$ sudo wvdialconf /etc/wvdial.conf…
    editing ‘/etc/wvdial.conf’

    scanning your serial ports for a modem

    modem port Scan: S0
    ttySI: ATQ0 V1 E1 — failed with 2400 baud, next try : 9600 baud
    ttySI: ATQ0 V1 E1 — failed with 9600 baud, next try : 115200 baud
    ttySI: ATQ0 V1 E1 — and failed too at 115200, giving up
    Modem port scan : S2 S2

    sorry, no modem was detected! Is it in use by another program ?
    Did you configure it properly with setserial ?

    Please read the FAQ at http://open.nit.ca/wiki/?Wvdial

    if you still have problem, sent mail to

    Nah, habis ini udah gue baca totorialnya n gue udah coba gan…tetep ga bisa…..

    Mohon pencerahan dong gan…..suwun…..

    • ohdediku Says:

      Coba modemnya di flush dulu gan .
      Suwun🙂

  49. cahyo Says:

    Nah, waktu gue jalani
    presario@presario-laptop:~$ sudo pppoeconf

    itu modem ga mao ke deteksi……

    waktu gue check dpkg -s pppoeconf

    Package : pppoeconf
    Status : install ok installed

    tapi gue check salahnya dimana

    presario@presario-laptop:~$ plog
    oct 1 21:35:34 presario-laptop pppd[6188]: LCP: timeout sending Config-Requests
    oct 1 21:35:34 presario-laptop pppd[6188]: LCP: Modem hangup
    oct 1 21:35:34 presario-laptop pppd[6188]: LCP: Using Interface ppp0
    oct 1 21:35:34 presario-laptop pppd[6188]: LCP: Connect: ppp0 /dev/pts/0
    oct 1 21:35:34 presario-laptop pppd[6188]: LCP: Modem hangup
    oct 1 21:35:34 presario-laptop pppd[6188]: LCP: Connection terminated
    oct 1 21:35:34 presario-laptop pppd[6188]: LCP:
    Failed to open /dev/pts/0: No such file of directory
    oct 1 21:35:34 presario-laptop pppd[6188]: LCP: Exit

    TUh ga errornya….malah makin binun……

  50. oLyZ-Jogja Says:

    Alhamdulillah ya Allah . . .

    masss thanks berat tutorialnya . .. skrg sya bsa browsing ria pkek ubuntu . . . negh skrang saya lgi pakek ubuntu buat browsing2 hohoho maknyusss tenann . . . i love u full ubuntu . ..!! akakakkaka

    walaupun otak atik ampe jenggoten gra2 modem not detect eghh skrang udh bisa maknyus tenann !!!! akakakaka😀

    • ohdediku Says:

      Kwkwkkwkw .
      tenang mas, sabaaarrr .
      santai, slowww….😀

      • oLyZ-Jogja Says:

        awkkwakwa eo mas wes sante saiki . .

        soale wes iso ngnet ng ubuntu kwakawkwak ??

        maaknyyosss . . hohoohohowww .. .

        mas puny dvd-repo ubuntu ???

        klo puny saya ngopy gan . . .

        • ohdediku Says:

          ha haa .
          mau ngopy repo yaa .
          boleh . boleh .
          tp skg ane lg pulkam nih .🙂

          • oLyZ-Jogja Says:

            woke2. . kbrin gw lo sdah blik k jogja gan . . . hehehe

            ehh trnyta 24 jam nonstop jg negh g DC ebat2 . . . wihhhhh . . .

  51. kangtatang Says:

    Nah kalo nyetting di Zenwalk atau slackware gimana? apakah konsepnya sama atau ada perbedaan?

    salam
    kangtatang

    • ohdediku Says:

      wah ada kangtatang .😀
      kalo Zenwalk atau Slackware ane belum coba mas,
      mungkin sama kali ea, toh cm butuh wvdial . ^^
      mungkin .

  52. ekieinstein Says:

    pakde ada yang lebih praktis ga ? saya gak ngerti bahasa program begituan !!! tadinya sih pengin pakek ubuntu “i have the cd” tapi kayaknya nginstal modemnya repot bgt !!, gak punya paket langsung instal ya !!! soalnya susah bgt ngikutin keterangannya !!!

    • ohdediku Says:

      di coba dulu pakde, pasti bisa kok .
      sebenere ada paket install instan, tp yaitu masih
      ada yang berbau2 terminal / konsole .🙂
      thanks kunjungannya pakde …

  53. curious Says:

    gan semua dah tak ikuti tapi selalu g bisa. waktu loading awal ada tulisan “invalid for parameter …. usb serial ….”. kira-kira ini kenapa?


    wah ada yang salah mungkin masukin code diatas (annoyed)

  54. curious Says:

    thank you gan dah bisa tuk kompiku tapi laptpku belum tak coba,dari kemarin masih g bisa mungkin krn belum pas settingannya. thanks tuk komen2 diatas yang telah banyak membantu.


    Alhamdulillah …😛
    makasih gan dah mampir .

  55. diansyawal Says:

    saya memakai mobi dengan modem Pantech PX-500,,gimana caranya unuk koneksi di ubuntu 9.04??
    soalnya yang mas terangin diatas semua kebanyakan untuk modem smart..tolong pencerahanya ya mas…


    mobi . mobiii .
    mungkin secara garis besar sama gan .
    tapii, sayange ane blm pernah coba tuuh modem.😦

    • Puskesmas Mekarwangi Says:

      untuk mobi lebih mudah, karena udah ke detek modem nya gan, tinggal ikuti langkah berikut:
      1. Masukkan usb modem Mobi ke port usb pc/note/netbook anda.

      2. Cari icon NetworkManager yang ada di panel atas (nyang kayak tower BTS)

      3. (Sudah??) Klik kanan utuk konfigurasi manual dan pilih “Edit Connections…” akan muncul Network Connections, langsung masuk ke tab “Mobile Broadband” terus pilih Add kalau belum ada atau Edit kalau Ubuntu sudah mengenali modem anda.

      4. Karena Ubuntu saya sudah mengenali modem Mobi maka saya pilih “Edit”.

      5. Di Editing ini silahkan konfigurasi secara manual…

      Connection Name: (terserah anda)

      Number: #777

      Username: no.mobi@unlimited

      Password: ******
      untuk username n password, sama kayak di win****

      Jika sudah klik Apply dan tutup NetworkManagernya.

  56. andri Says:

    tresnawan@tresnawan:~$ sudo wvdialconf /etc/wvdial.conf
    Editing `/etc/wvdial.conf’.

    Scanning your serial ports for a modem.

    Modem Port Scan: S0 S1 S2 S3 USB0 USB1 USB2

    Sorry, no modem was detected! Is it in use by another program?
    Did you configure it properly with setserial?

    Please read the FAQ at http://open.nit.ca/wiki/?WvDial

    If you still have problems, send mail to .
    tresnawan@tresnawan:~$


    coba modemnya di konekin dulu di wiinggdooosss,
    kemudian diskonek lagi dan di konekin ke linuxxx…
    **semangat gan😀

  57. putra Says:

    waktu ngejalanin ~$ sudo gedit /boot/grub/menu.lst kok malah muncul command not found?? kenapa ya?? saya newbie linux mas mohon bantuan.


    Hm ..
    kenapa yaa ??
    command not found [perintah tidak ada / tersedia]😛
    .
    tulisannya dah bener kayak gitu gan ??

  58. fontie Says:

    gan aku pas searching ini

    ## ## End Default Options ##

    title Ubuntu 9.04, kernel 2.6.28-11-generic
    uuid 593c8ece-2c78-45d4-b014-140376bab2dd
    kernel /boot/vmlinuz-2.6.28-11-generic root=UUID=593c8ece-2c78-45d4b014-140376bab2dd ro quiet splash
    initrd /boot/initrd.img-2.6.28-11-generic
    quiet

    tapi yang muncul kok kayaknya beda ya, ditempatQ kayak gini

    ## ## End Default Options ##

    title Ubuntu 9.04, kernel 2.6.28-11-generic
    root ()/ubuntu/disks
    kernel /boot/vmlinuz-2.6.28-11-generic root=UUID=3C68E6AC68E663DC loop=/ubuntu/disks/root.disk ro quiet splash
    initrd /boot/initrd.img-2.6.28-11-generic

    trus aku coba lanjutin aja, siapa tau sama. aku edit jadi kayak gini

    ## ## End Default Options ##

    title Ubuntu 9.04, kernel 2.6.28-11-generic with usbserial
    root ()/ubuntu/disks
    kernel /boot/vmlinuz-2.6.28-11-generic root=UUID=3C68E6AC68E663DC loop=/ubuntu/disks/root.disk ro quiet splash
    usbserial.vendor=0×15eb usbserial.product=0×0001
    initrd /boot/initrd.img-2.6.28-11-generic

    langkah demi langkah udah selesai, tapi pas aku nyoba manggil sudo wvdial smart, malah error. error nya kayak gini

    fontz@ubuntu :~$ sudo wvdial smart
    –> Wvdial: Internet dialer version 1.60
    –> Cannot open /dev/ttyUSB0: No such file or directory
    –> Cannot open /dev/ttyUSB0: No such file or directory
    –> Cannot open /dev/ttyUSB0: No such file or directory

    padahal modem saya udah nancep gan, trus aku coba restart, tetep gag bisa juga..

    kira2 kenapa ya gan ? udah gag sabar konekin smart di ubuntu ku nih.. hehehe..


    modemnya udah di koneksikan ke window$ gan ?
    coba di konekin ke win ===> diskonek ====> koneksikan ke ubuntu .😀

    • foNtiE Says:

      sudah gan.. tapi tetep gag bisa..
      langkah2ku diatas sudah benar kan ?

    • ipul Says:

      usbserial.vendor=0x*** <<<ini harus satu baris dengan splash.jadi ini harus satu baris "***68E663DC loop=/ubuntu/disks/root.disk ro quiet splash
      usbserial.vendor=0×15eb usbserial.product=0×0001
      initrd /boot/initrd.img-2.6.28-11-generic ***"
      saya pernah bikin beda garis ,dan ga bisa….

    • ipul Says:

      coba check “dmesg |grep USB”
      jika ada ttyUSB0 dan ttyUSB1 ,sesuaikan setingan wvdial.conf nya dengan /dev/ttyUSB1 .munkin bisa membantu

  59. Viktorojo Says:

    Sory..!!! kawan2 sy pendatang baru dan baru mencoba Haier D1200 pada linux UbuntuME 9.(Sabily), dan sy sudah mencoba mengikuti semua arahan dan petunjuk yg ada , tetapi usb/Haier D1200 sy tidak terdeteksi sama sekali, lain ketika sy coba pada OS Lain ( XP/Vista ).

    saya mohon petunjuk dan pelajarannya mas…Monggo di E-mail pun boleh (viktor.ojo@gmail.com)

    salam…


    Tidak bisanya sampai langkah mana gan,
    coba di copas dimari ………
    salam jg dari ohdediku🙂

  60. foNtiE Says:

    udah ada solusi gan ? hehehe..

  61. Viktorojo Says:

    terima ksih sebelumnya atas perhatiannya.

    saya menggunakan PC berbasis
    AMD Athlon 64 X2 DC 5200
    memory 1Gb
    MB ECS MA770-A (AMD 770 Sb 600)
    Vga Ati x1550 512Mb
    mungkinkah kendalanya ada pada Driver MB Sy..?
    Saya coba jelaskan dari awal (semua configurasi melalui “gedit /etc/wvdial.conf” sudah sy kerjakan)

    1. saya koneksikan USB ke HP
    2. kemudian sy masukan perintah “…# Lsusb”
    jawabnya masih normal
    : BUS 002 DEVICE 004: ID 15eb : 0001
    3. lalu saya ketikan “dmesg”
    keluar pernyataan :
    FATAL: Error inserting usbserial (….):
    dan terhenti disitu.

    mohon bantuannya..

    terima kasih.
    salam…

  62. Haier D1200P on Linux Mint 7 | REMINISCENCE Says:

    […] dengan bantuan dari blog teman saya, akhirnya bisa juga internetan dengan […]

  63. Viktorojo Says:

    kepada mas yang mengasuh blog ini khususnya dan kawan2 sekalian

    Saya mempunyai kesulitan untuk mengkoneksikan Linux UbuntuME 9 saya dengan
    Modem Smart Hair d1200, saya sudah beberapakali melakukan saran2 dari teman2 sekalian,
    namun saya belum juga dapat mengkoneksikan modem tsb.
    Disini saya coba uraikan langkah demi langkah yang teman2 sekalian anjurkan.

    Pertama saya koneksi Modem/Hp Haier :

    kemudian melihat koneksi USB

    root@viktorojo-desktop:~# lsusb

    Bus 001 Device 003: ID 0951:1603 Kingston Technology Data Traveler 1GB/2GB Pen Drive
    Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
    Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
    Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
    Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
    Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
    Bus 002 Device 002: ID 15eb:0001
    Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub

    semua masih berjalan normal…

    kemudian saya coba perintah berikut ini (modprobe usbserial vendor=0×15eb product=0×0001)

    root@viktorojo-desktop:~# modprobe usbserial vendor=0×15eb product=0×0001
    FATAL: Module usbserial not found.

    atau coba metode dgn menggunakan HURUF BESAR (Spt kata Bloger yg Lain)

    root@viktorojo-desktop:~# modprobe usbserial vendor=0X15eb product=0X0001
    FATAL: Module usbserial not found.

    disini saya bingung tapi saya coba melanjutkannya…!!!

    kemudian mendefinikan device

    root@viktorojo-desktop:~# dmseg ( ma’af terlalu panjang..!! )

    [ 0.400409] pci 0000:00:14.1: reg 1c io port: [0x00-0x03]
    [ 0.400416] pci 0000:00:14.1: reg 20 io port: [0xff00-0xff0f]
    [ 0.400470] pci 0000:00:14.2: reg 10 64bit mmio: [0xfe8f4000-0xfe8f7fff]
    [ 0.400506] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
    [ 0.400510] pci 0000:00:14.2: PME# disabled
    [ 0.400701] pci 0000:01:00.0: reg 10 64bit mmio: [0xd0000000-0xdfffffff]
    [ 0.400710] pci 0000:01:00.0: reg 18 64bit mmio: [0xfe9f0000-0xfe9fffff]
    [ 0.400715] pci 0000:01:00.0: reg 20 io port: [0xb000-0xb0ff]
    [ 0.400724] pci 0000:01:00.0: reg 30 32bit mmio: [0xfe9c0000-0xfe9dffff]
    [ 0.400731] pci 0000:01:00.0: supports D1 D2
    [ 0.400763] pci 0000:01:00.1: reg 10 64bit mmio: [0xfe9e0000-0xfe9effff]
    [ 0.400788] pci 0000:01:00.1: supports D1 D2
    [ 0.400844] pci 0000:00:02.0: bridge io port: [0xb000-0xbfff]
    [ 0.400847] pci 0000:00:02.0: bridge 32bit mmio: [0xfe900000-0xfe9fffff]
    [ 0.400851] pci 0000:00:02.0: bridge 64bit mmio pref: [0xd0000000-0xdfffffff]
    [ 0.400899] pci 0000:02:00.0: reg 10 io port: [0xc800-0xc8ff]
    [ 0.400917] pci 0000:02:00.0: reg 18 64bit mmio: [0xfeaff000-0xfeafffff]
    [ 0.400935] pci 0000:02:00.0: reg 30 32bit mmio: [0xfeac0000-0xfeadffff]
    [ 0.400946] pci 0000:02:00.0: supports D1 D2
    [ 0.400947] pci 0000:02:00.0: PME# supported from D1 D2 D3hot D3cold
    [ 0.400951] pci 0000:02:00.0: PME# disabled
    [ 0.401009] pci 0000:00:06.0: bridge io port: [0xc000-0xcfff]
    [ 0.401012] pci 0000:00:06.0: bridge 32bit mmio: [0xfea00000-0xfeafffff]
    [ 0.401089] pci 0000:03:00.0: reg 24 32bit mmio: [0xfebfe000-0xfebfffff]
    [ 0.401097] pci 0000:03:00.0: reg 30 32bit mmio: [0xfebe0000-0xfebeffff]
    [ 0.401107] pci 0000:03:00.0: PME# supported from D3hot
    [ 0.401112] pci 0000:03:00.0: PME# disabled
    [ 0.401156] pci 0000:03:00.1: reg 10 io port: [0xe800-0xe807]
    [ 0.401163] pci 0000:03:00.1: reg 14 io port: [0xe400-0xe403]
    [ 0.401171] pci 0000:03:00.1: reg 18 io port: [0xe000-0xe007]
    [ 0.401178] pci 0000:03:00.1: reg 1c io port: [0xd800-0xd803]
    [ 0.401185] pci 0000:03:00.1: reg 20 io port: [0xd400-0xd40f]
    [ 0.401269] pci 0000:00:07.0: bridge io port: [0xd000-0xefff]
    [ 0.401271] pci 0000:00:07.0: bridge 32bit mmio: [0xfeb00000-0xfebfffff]
    [ 0.401335] pci 0000:00:14.4: transparent bridge
    [ 0.401357] bus 00 -> node 0
    [ 0.401363] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
    [ 0.401628] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE2._PRT]
    [ 0.401727] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0PC._PRT]
    [ 0.404144] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 *5 7 10 11 12 14 15)
    [ 0.404242] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 10 11 12 14 *15)
    [ 0.404339] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 *10 11 12 14 15)
    [ 0.404435] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 *10 11 12 14 15)
    [ 0.404532] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
    [ 0.404629] ACPI: PCI Interrupt Link [LNKF] (IRQs 9) *0, disabled.
    [ 0.404724] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 10 *11 12 14 15)
    [ 0.404820] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
    [ 0.404920] ACPI Warning (tbutils-0217): Incorrect checksum in table [OEMB] – 05, should be 04 [20080926]
    [ 0.404947] ACPI: WMI: Mapper loaded
    [ 0.405008] SCSI subsystem initialized
    [ 0.405008] libata version 3.00 loaded.
    [ 0.405008] usbcore: registered new interface driver usbfs
    [ 0.405008] usbcore: registered new interface driver hub
    [ 0.405008] usbcore: registered new device driver usb
    [ 0.405008] PCI: Using ACPI for IRQ routing
    [ 0.405008] pci 0000:00:00.0: BAR 3: can’t allocate resource
    [ 0.412009] Bluetooth: Core ver 2.13
    [ 0.412025] NET: Registered protocol family 31
    [ 0.412025] Bluetooth: HCI device and connection manager initialized
    [ 0.412025] Bluetooth: HCI socket layer initialized
    [ 0.412025] NET: Registered protocol family 8
    [ 0.412025] NET: Registered protocol family 20
    [ 0.412027] NetLabel: Initializing
    [ 0.412028] NetLabel: domain hash size = 128
    [ 0.412030] NetLabel: protocols = UNLABELED CIPSOv4
    [ 0.412042] NetLabel: unlabeled traffic allowed by default
    [ 0.412058] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
    [ 0.412062] hpet0: 4 comparators, 32-bit 14.318180 MHz counter
    [ 0.416069] AppArmor: AppArmor Filesystem Enabled
    [ 0.420016] Switched to high resolution mode on CPU 0
    [ 0.420222] Switched to high resolution mode on CPU 1
    [ 0.424016] pnp: PnP ACPI init
    [ 0.424029] ACPI: bus type pnp registered
    [ 0.426644] pnp 00:0d: mem resource (0x0-0x9ffff) overlaps 0000:00:00.0 BAR 3 (0x0-0x1fffffff), disabling
    [ 0.426646] pnp 00:0d: mem resource (0xc0000-0xcffff) overlaps 0000:00:00.0 BAR 3 (0x0-0x1fffffff), disabling
    [ 0.426649] pnp 00:0d: mem resource (0xe0000-0xfffff) overlaps 0000:00:00.0 BAR 3 (0x0-0x1fffffff), disabling
    [ 0.426652] pnp 00:0d: mem resource (0x100000-0x3fffffff) overlaps 0000:00:00.0 BAR 3 (0x0-0x1fffffff), disabling
    [ 0.426915] pnp: PnP ACPI: found 14 devices
    [ 0.426917] ACPI: ACPI bus type pnp unregistered
    [ 0.426919] PnPBIOS: Disabled by ACPI PNP
    [ 0.426929] system 00:06: iomem range 0xfec00000-0xfec00fff has been reserved
    [ 0.426931] system 00:06: iomem range 0xfee00000-0xfee00fff has been reserved
    [ 0.426936] system 00:07: ioport range 0x4d0-0x4d1 has been reserved
    [ 0.426938] system 00:07: ioport range 0x40b-0x40b has been reserved
    [ 0.426940] system 00:07: ioport range 0x4d6-0x4d6 has been reserved
    [ 0.426942] system 00:07: ioport range 0xc00-0xc01 has been reserved
    [ 0.426944] system 00:07: ioport range 0xc14-0xc14 has been reserved
    [ 0.426946] system 00:07: ioport range 0xc50-0xc51 has been reserved
    [ 0.426948] system 00:07: ioport range 0xc52-0xc52 has been reserved
    [ 0.426950] system 00:07: ioport range 0xc6c-0xc6c has been reserved
    [ 0.426952] system 00:07: ioport range 0xc6f-0xc6f has been reserved
    [ 0.426955] system 00:07: ioport range 0xcd0-0xcd1 has been reserved
    [ 0.426957] system 00:07: ioport range 0xcd2-0xcd3 has been reserved
    [ 0.426959] system 00:07: ioport range 0xcd4-0xcd5 has been reserved
    [ 0.426961] system 00:07: ioport range 0xcd6-0xcd7 has been reserved
    [ 0.426963] system 00:07: ioport range 0xcd8-0xcdf has been reserved
    [ 0.426965] system 00:07: ioport range 0x800-0x89f has been reserved
    [ 0.426967] system 00:07: ioport range 0xb10-0xb1f has been reserved
    [ 0.426969] system 00:07: ioport range 0x900-0x90f has been reserved
    [ 0.426971] system 00:07: ioport range 0x910-0x91f has been reserved
    [ 0.426973] system 00:07: ioport range 0xfe00-0xfefe has been reserved
    [ 0.426976] system 00:07: iomem range 0xffb80000-0xffbfffff has been reserved
    [ 0.426981] system 00:0a: ioport range 0xe00-0xe0f has been reserved
    [ 0.426983] system 00:0a: ioport range 0xe80-0xe8f has been reserved
    [ 0.426984] system 00:0a: ioport range 0xf40-0xf4f has been reserved
    [ 0.426986] system 00:0a: ioport range 0xa30-0xa3f has been reserved
    [ 0.426990] system 00:0c: iomem range 0xe0000000-0xefffffff has been reserved
    [ 0.426995] system 00:0d: iomem range 0xfec00000-0xd7fffff could not be reserved
    [ 0.461668] pci 0000:00:02.0: PCI bridge, secondary bus 0000:01
    [ 0.461671] pci 0000:00:02.0: IO window: 0xb000-0xbfff
    [ 0.461675] pci 0000:00:02.0: MEM window: 0xfe900000-0xfe9fffff
    [ 0.461677] pci 0000:00:02.0: PREFETCH window: 0x000000d0000000-0x000000dfffffff
    [ 0.461681] pci 0000:00:06.0: PCI bridge, secondary bus 0000:02
    [ 0.461684] pci 0000:00:06.0: IO window: 0xc000-0xcfff
    [ 0.461687] pci 0000:00:06.0: MEM window: 0xfea00000-0xfeafffff
    [ 0.461689] pci 0000:00:06.0: PREFETCH window: disabled
    [ 0.461693] pci 0000:00:07.0: PCI bridge, secondary bus 0000:03
    [ 0.461695] pci 0000:00:07.0: IO window: 0xd000-0xefff
    [ 0.461698] pci 0000:00:07.0: MEM window: 0xfeb00000-0xfebfffff
    [ 0.461700] pci 0000:00:07.0: PREFETCH window: disabled
    [ 0.461703] pci 0000:00:14.4: PCI bridge, secondary bus 0000:04
    [ 0.461705] pci 0000:00:14.4: IO window: disabled
    [ 0.461710] pci 0000:00:14.4: MEM window: disabled
    [ 0.461714] pci 0000:00:14.4: PREFETCH window: disabled
    [ 0.461727] pci 0000:00:02.0: setting latency timer to 64
    [ 0.461732] pci 0000:00:06.0: setting latency timer to 64
    [ 0.461737] pci 0000:00:07.0: setting latency timer to 64
    [ 0.461745] bus: 00 index 0 io port: [0x00-0xffff]
    [ 0.461746] bus: 00 index 1 mmio: [0x000000-0xffffffff]
    [ 0.461748] bus: 01 index 0 io port: [0xb000-0xbfff]
    [ 0.461749] bus: 01 index 1 mmio: [0xfe900000-0xfe9fffff]
    [ 0.461751] bus: 01 index 2 mmio: [0xd0000000-0xdfffffff]
    [ 0.461752] bus: 01 index 3 mmio: [0x0-0x0]
    [ 0.461754] bus: 02 index 0 io port: [0xc000-0xcfff]
    [ 0.461755] bus: 02 index 1 mmio: [0xfea00000-0xfeafffff]
    [ 0.461757] bus: 02 index 2 mmio: [0x0-0x0]
    [ 0.461758] bus: 02 index 3 mmio: [0x0-0x0]
    [ 0.461760] bus: 03 index 0 io port: [0xd000-0xefff]
    [ 0.461761] bus: 03 index 1 mmio: [0xfeb00000-0xfebfffff]
    [ 0.461763] bus: 03 index 2 mmio: [0x0-0x0]
    [ 0.461764] bus: 03 index 3 mmio: [0x0-0x0]
    [ 0.461765] bus: 04 index 0 mmio: [0x0-0x0]
    [ 0.461766] bus: 04 index 1 mmio: [0x0-0x0]
    [ 0.461768] bus: 04 index 2 mmio: [0x0-0x0]
    [ 0.461769] bus: 04 index 3 io port: [0x00-0xffff]
    [ 0.461771] bus: 04 index 4 mmio: [0x000000-0xffffffff]
    [ 0.461779] NET: Registered protocol family 2
    [ 0.476059] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
    [ 0.476317] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
    [ 0.477071] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
    [ 0.477454] TCP: Hash tables configured (established 131072 bind 65536)
    [ 0.477456] TCP reno registered
    [ 0.484102] NET: Registered protocol family 1
    [ 0.484216] checking if image is initramfs… it is
    [ 0.931645] Freeing initrd memory: 7437k freed
    [ 0.931838] cpufreq: No nForce2 chipset.
    [ 0.931940] audit: initializing netlink socket (disabled)
    [ 0.931957] type=2000 audit(1257607021.928:1): initialized
    [ 0.937946] highmem bounce pool size: 64 pages
    [ 0.937951] HugeTLB registered 4 MB page size, pre-allocated 0 pages
    [ 0.938884] VFS: Disk quotas dquot_6.5.1
    [ 0.938925] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
    [ 0.939390] fuse init (API version 7.10)
    [ 0.939452] msgmni has been set to 1724
    [ 0.939636] alg: No test for stdrng (krng)
    [ 0.939648] io scheduler noop registered
    [ 0.939650] io scheduler anticipatory registered
    [ 0.939651] io scheduler deadline registered
    [ 0.939664] io scheduler cfq registered (default)
    [ 1.060048] pci 0000:01:00.0: Boot video device
    [ 1.063366] pcieport-driver 0000:00:02.0: setting latency timer to 64
    [ 1.063393] pcieport-driver 0000:00:02.0: found MSI capability
    [ 1.063415] pcieport-driver 0000:00:02.0: irq 2303 for MSI/MSI-X
    [ 1.063423] pci_express 0000:00:02.0:pcie00: allocate port service
    [ 1.063434] pci_express 0000:00:02.0:pcie03: allocate port service
    [ 1.063471] pcieport-driver 0000:00:06.0: setting latency timer to 64
    [ 1.063495] pcieport-driver 0000:00:06.0: found MSI capability
    [ 1.063512] pcieport-driver 0000:00:06.0: irq 2302 for MSI/MSI-X
    [ 1.063520] pci_express 0000:00:06.0:pcie00: allocate port service
    [ 1.063530] pci_express 0000:00:06.0:pcie03: allocate port service
    [ 1.063566] pcieport-driver 0000:00:07.0: setting latency timer to 64
    [ 1.063590] pcieport-driver 0000:00:07.0: found MSI capability
    [ 1.063607] pcieport-driver 0000:00:07.0: irq 2301 for MSI/MSI-X
    [ 1.063615] pci_express 0000:00:07.0:pcie00: allocate port service
    [ 1.063624] pci_express 0000:00:07.0:pcie03: allocate port service
    [ 1.063677] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
    [ 1.063684] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
    [ 1.063799] input: Power Button (FF) as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
    [ 1.063801] ACPI: Power Button (FF) [PWRF]
    [ 1.063842] input: Power Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1
    [ 1.063849] ACPI: Power Button (CM) [PWRB]
    [ 1.064050] ACPI: duty_cycle spans bit 4
    [ 1.064075] processor ACPI_CPU:00: registered as cooling_device0
    [ 1.064102] processor ACPI_CPU:01: registered as cooling_device1
    [ 1.066147] thermal LNXTHERM:01: registered as thermal_zone0
    [ 1.066276] ACPI: Thermal Zone [THRM] (30 C)
    [ 1.066312] isapnp: Scanning for PnP cards…
    [ 1.420282] isapnp: No Plug & Play device found
    [ 1.428644] hpet_acpi_add: no address or irqs in _CRS
    [ 1.428663] Serial: 8250/16550 driver4 ports, IRQ sharing enabled
    [ 1.428773] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
    [ 1.429083] 00:0b: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
    [ 1.429683] brd: module loaded
    [ 1.429937] loop: module loaded
    [ 1.429998] Fixed MDIO Bus: probed
    [ 1.430003] PPP generic driver version 2.4.2
    [ 1.430048] input: Macintosh mouse button emulation as /devices/virtual/input/input2
    [ 1.430071] Driver ‘sd’ needs updating – please use bus_type methods
    [ 1.430078] Driver ‘sr’ needs updating – please use bus_type methods
    [ 1.430108] ahci 0000:00:12.0: version 3.0
    [ 1.430130] ahci 0000:00:12.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
    [ 1.430171] ahci 0000:00:12.0: controller can’t do 64bit DMA, forcing 32bit
    [ 1.430267] ahci 0000:00:12.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl SATA mode
    [ 1.430269] ahci 0000:00:12.0: flags: ncq sntf ilck pm led clo pmp pio slum part
    [ 1.430790] scsi0 : ahci
    [ 1.430923] scsi1 : ahci
    [ 1.430988] scsi2 : ahci
    [ 1.431066] scsi3 : ahci
    [ 1.431144] ata1: SATA max UDMA/133 abar m1024@0xfe8ff800 port 0xfe8ff900 irq 22
    [ 1.431147] ata2: SATA max UDMA/133 irq_stat 0x00000040, connection status changed irq 22
    [ 1.431150] ata3: SATA max UDMA/133 abar m1024@0xfe8ff800 port 0xfe8ffa00 irq 22
    [ 1.431153] ata4: SATA max UDMA/133 abar m1024@0xfe8ff800 port 0xfe8ffa80 irq 22
    [ 1.912018] ata1: softreset failed (device not ready)
    [ 1.912065] ata1: failed due to HW bug, retry pmp=0
    [ 2.076032] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
    [ 2.117821] ata1.00: ATA-7: ST3160215AS, 4.AAB, max UDMA/133
    [ 2.117823] ata1.00: 312581808 sectors, multi 16: LBA48 NCQ (depth 31/32)
    [ 2.117837] ata1.00: SB600 AHCI: limiting to 255 sectors per cmd
    [ 2.176136] ata1.00: SB600 AHCI: limiting to 255 sectors per cmd
    [ 2.176138] ata1.00: configured for UDMA/133
    [ 3.080014] ata2: softreset failed (device not ready)
    [ 3.080060] ata2: failed due to HW bug, retry pmp=0
    [ 3.244028] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
    [ 3.245972] ata2.00: ATAPI: PIONEER DVD-RW DVR-217, 1.05, max UDMA/66
    [ 3.245986] ata2.00: SB600 AHCI: limiting to 255 sectors per cmd
    [ 3.248337] ata2.00: SB600 AHCI: limiting to 255 sectors per cmd
    [ 3.248339] ata2.00: configured for UDMA/66
    [ 3.584032] ata3: SATA link down (SStatus 0 SControl 300)
    [ 3.920033] ata4: SATA link down (SStatus 0 SControl 300)
    [ 3.936131] scsi 0:0:0:0: Direct-Access ATA ST3160215AS 4.AA PQ: 0 ANSI: 5
    [ 3.936206] sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors: (160 GB/149 GiB)
    [ 3.936220] sd 0:0:0:0: [sda] Write Protect is off
    [ 3.936222] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
    [ 3.936242] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn’t support DPO or FUA
    [ 3.936311] sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors: (160 GB/149 GiB)
    [ 3.936321] sd 0:0:0:0: [sda] Write Protect is off
    [ 3.936323] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
    [ 3.936341] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn’t support DPO or FUA
    [ 3.936344] sda: sda1 sda2 sda3 sda4
    [ 3.978795] sd 0:0:0:0: [sda] Attached SCSI disk
    [ 3.978840] sd 0:0:0:0: Attached scsi generic sg0 type 0
    [ 3.982370] scsi 1:0:0:0: CD-ROM PIONEER DVD-RW DVR-217 1.05 PQ: 0 ANSI: 5
    [ 3.985562] sr0: scsi3-mmc drive: 125x/125x writer dvd-ram cd/rw xa/form2 cdda tray
    [ 3.985565] Uniform CD-ROM driver Revision: 3.20
    [ 3.985636] sr 1:0:0:0: Attached scsi CD-ROM sr0
    [ 3.985667] sr 1:0:0:0: Attached scsi generic sg1 type 5
    [ 3.985710] ahci 0000:03:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
    [ 3.985749] ahci 0000:03:00.0: JMB361 has only one port, port_map 0x3 -> 0x1
    [ 4.000049] ahci 0000:03:00.0: AHCI 0001.0000 32 slots 2 ports 3 Gbps 0x1 impl SATA mode
    [ 4.000052] ahci 0000:03:00.0: flags: 64bit ncq pm led clo pmp pio slum part
    [ 4.000057] ahci 0000:03:00.0: setting latency timer to 64
    [ 4.000223] scsi4 : ahci
    [ 4.000303] scsi5 : ahci
    [ 4.000334] ata5: SATA max UDMA/133 abar m8192@0xfebfe000 port 0xfebfe100 irq 19
    [ 4.000336] ata6: DUMMY
    [ 4.320032] ata5: SATA link down (SStatus 0 SControl 300)
    [ 4.336233] pata_atiixp 0000:00:14.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16
    [ 4.336269] pata_atiixp 0000:00:14.1: setting latency timer to 64
    [ 4.336354] scsi6 : pata_atiixp
    [ 4.336431] scsi7 : pata_atiixp
    [ 4.337522] ata7: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xff00 irq 14
    [ 4.337524] ata8: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xff08 irq 15
    [ 4.500508] ata7.00: ATAPI: TSSTcorpCD/DVDW SH-S182F, SB02, max UDMA/33
    [ 4.516439] ata7.00: configured for UDMA/33
    [ 4.673070] scsi 6:0:0:0: CD-ROM TSSTcorp CD/DVDW SH-S182F SB02 PQ: 0 ANSI: 5
    [ 4.679590] sr1: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
    [ 4.679667] sr 6:0:0:0: Attached scsi CD-ROM sr1
    [ 4.679709] sr 6:0:0:0: Attached scsi generic sg2 type 5
    [ 4.679857] pata_jmicron 0000:03:00.1: enabling device (0000 -> 0001)
    [ 4.679866] pata_jmicron 0000:03:00.1: PCI INT B -> GSI 16 (level, low) -> IRQ 16
    [ 4.679905] pata_jmicron 0000:03:00.1: setting latency timer to 64
    [ 4.679995] scsi8 : pata_jmicron
    [ 4.680073] scsi9 : pata_jmicron
    [ 4.680099] ata9: PATA max UDMA/100 cmd 0xe800 ctl 0xe400 bmdma 0xd400 irq 16
    [ 4.680101] ata10: PATA max UDMA/100 cmd 0xe000 ctl 0xd800 bmdma 0xd408 irq 16
    [ 5.003601] ehci_hcd: USB 2.0 ‘Enhanced’ Host Controller (EHCI) Driver
    [ 5.003619] ehci_hcd 0000:00:13.5: PCI INT D -> GSI 19 (level, low) -> IRQ 19
    [ 5.003640] ehci_hcd 0000:00:13.5: EHCI Host Controller
    [ 5.003691] ehci_hcd 0000:00:13.5: new USB bus registered, assigned bus number 1
    [ 5.003717] ehci_hcd 0000:00:13.5: applying AMD SB600/SB700 USB freeze workaround
    [ 5.003739] ehci_hcd 0000:00:13.5: debug port 1
    [ 5.003746] ehci_hcd 0000:00:13.5: irq 19, io mem 0xfe8ff000
    [ 5.012513] ehci_hcd 0000:00:13.5: USB 2.0 started, EHCI 1.00
    [ 5.012585] usb usb1: configuration #1 chosen from 1 choice
    [ 5.012611] hub 1-0:1.0: USB hub found
    [ 5.012619] hub 1-0:1.0: 10 ports detected
    [ 5.012718] ohci_hcd: USB 1.1 ‘Open’ Host Controller (OHCI) Driver
    [ 5.012732] ohci_hcd 0000:00:13.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
    [ 5.012742] ohci_hcd 0000:00:13.0: OHCI Host Controller
    [ 5.012785] ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 2
    [ 5.012799] ohci_hcd 0000:00:13.0: irq 16, io mem 0xfe8fe000
    [ 5.072041] usb usb2: configuration #1 chosen from 1 choice
    [ 5.072059] hub 2-0:1.0: USB hub found
    [ 5.072068] hub 2-0:1.0: 2 ports detected
    [ 5.072139] ohci_hcd 0000:00:13.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
    [ 5.072148] ohci_hcd 0000:00:13.1: OHCI Host Controller
    [ 5.072179] ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 3
    [ 5.072199] ohci_hcd 0000:00:13.1: irq 17, io mem 0xfe8fd000
    [ 5.128036] usb usb3: configuration #1 chosen from 1 choice
    [ 5.128056] hub 3-0:1.0: USB hub found
    [ 5.128065] hub 3-0:1.0: 2 ports detected
    [ 5.128133] ohci_hcd 0000:00:13.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
    [ 5.128141] ohci_hcd 0000:00:13.2: OHCI Host Controller
    [ 5.128172] ohci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 4
    [ 5.128190] ohci_hcd 0000:00:13.2: irq 18, io mem 0xfe8fc000
    [ 5.184039] usb usb4: configuration #1 chosen from 1 choice
    [ 5.184057] hub 4-0:1.0: USB hub found
    [ 5.184066] hub 4-0:1.0: 2 ports detected
    [ 5.184136] ohci_hcd 0000:00:13.3: PCI INT B -> GSI 17 (level, low) -> IRQ 17
    [ 5.184145] ohci_hcd 0000:00:13.3: OHCI Host Controller
    [ 5.184176] ohci_hcd 0000:00:13.3: new USB bus registered, assigned bus number 5
    [ 5.184189] ohci_hcd 0000:00:13.3: irq 17, io mem 0xfe8fb000
    [ 5.240044] usb usb5: configuration #1 chosen from 1 choice
    [ 5.240061] hub 5-0:1.0: USB hub found
    [ 5.240070] hub 5-0:1.0: 2 ports detected
    [ 5.240137] ohci_hcd 0000:00:13.4: PCI INT C -> GSI 18 (level, low) -> IRQ 18
    [ 5.240146] ohci_hcd 0000:00:13.4: OHCI Host Controller
    [ 5.240178] ohci_hcd 0000:00:13.4: new USB bus registered, assigned bus number 6
    [ 5.240190] ohci_hcd 0000:00:13.4: irq 18, io mem 0xfe8fa000
    [ 5.296039] usb usb6: configuration #1 chosen from 1 choice
    [ 5.296057] hub 6-0:1.0: USB hub found
    [ 5.296070] hub 6-0:1.0: 2 ports detected
    [ 5.296139] uhci_hcd: USB Universal Host Controller Interface driver
    [ 5.296207] usbcore: registered new interface driver libusual
    [ 5.296235] usbcore: registered new interface driver usbserial
    [ 5.296244] USB Serial support registered for generic
    [ 5.436016] usb 1-8: new high speed USB device using ehci_hcd and address 3
    [ 5.570377] usb 1-8: configuration #1 chosen from 1 choice
    [ 5.832014] usb 2-2: new full speed USB device using ohci_hcd and address 2
    [ 5.999073] usb 2-2: configuration #1 chosen from 1 choice
    [ 6.007139] usbcore: registered new interface driver usbserial_generic
    [ 6.007141] usbserial: USB Serial Driver core
    [ 6.007176] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
    [ 6.007480] serio: i8042 KBD port at 0x60,0x64 irq 1
    [ 6.007484] serio: i8042 AUX port at 0x60,0x64 irq 12
    [ 6.007580] mice: PS/2 mouse device common for all mice
    [ 6.007707] rtc_cmos 00:02: RTC can wake from S4
    [ 6.007737] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
    [ 6.007764] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
    [ 6.007825] device-mapper: uevent: version 1.0.3
    [ 6.007921] device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised: dm-devel@redhat.com
    [ 6.008077] device-mapper: multipath: version 1.0.5 loaded
    [ 6.008080] device-mapper: multipath round-robin: version 1.0.0 loaded
    [ 6.008182] EISA: Probing bus 0 at eisa.0
    [ 6.008210] Cannot allocate resource for EISA slot 6
    [ 6.008211] Cannot allocate resource for EISA slot 7
    [ 6.008213] Cannot allocate resource for EISA slot 8
    [ 6.008214] EISA: Detected 0 cards.
    [ 6.008314] cpuidle: using governor ladder
    [ 6.008315] cpuidle: using governor menu
    [ 6.008719] TCP cubic registered
    [ 6.008794] NET: Registered protocol family 10
    [ 6.009123] lo: Disabled Privacy Extensions
    [ 6.009347] NET: Registered protocol family 17
    [ 6.009361] Bluetooth: L2CAP ver 2.11
    [ 6.009362] Bluetooth: L2CAP socket layer initialized
    [ 6.009364] Bluetooth: SCO (Voice Link) ver 0.6
    [ 6.009366] Bluetooth: SCO socket layer initialized
    [ 6.009400] Bluetooth: RFCOMM socket layer initialized
    [ 6.009408] Bluetooth: RFCOMM TTY layer initialized
    [ 6.009409] Bluetooth: RFCOMM ver 1.10
    [ 6.009454] powernow-k8: Found 1 AMD Athlon(tm) 64 X2 Dual Core Processor 5200+ processors (2 cpu cores) (version 2.20.00)
    [ 6.009512] powernow-k8: 0 : fid 0x13 (2700 MHz), vid 0x8
    [ 6.009515] powernow-k8: 1 : fid 0x12 (2600 MHz), vid 0x9
    [ 6.009517] powernow-k8: 2 : fid 0x10 (2400 MHz), vid 0xb
    [ 6.009519] powernow-k8: 3 : fid 0xe (2200 MHz), vid 0xd
    [ 6.009520] powernow-k8: 4 : fid 0xc (2000 MHz), vid 0xf
    [ 6.009522] powernow-k8: 5 : fid 0xa (1800 MHz), vid 0x11
    [ 6.009523] powernow-k8: 6 : fid 0x2 (1000 MHz), vid 0x12
    [ 6.009570] Using IPI No-Shortcut mode
    [ 6.009634] registered taskstats version 1
    [ 6.009773] Magic number: 1:865:284
    [ 6.009887] rtc_cmos 00:02: setting system clock to 2009-11-07 15:17:08 UTC (1257607028)
    [ 6.009890] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
    [ 6.009891] EDD information not available.
    [ 6.010255] Freeing unused kernel memory: 532k freed
    [ 6.010373] Write protecting the kernel text: 4128k
    [ 6.010412] Write protecting the kernel read-only data: 1532k
    [ 6.024891] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
    [ 6.161786] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
    [ 6.161807] r8169 0000:02:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
    [ 6.161826] r8169 0000:02:00.0: setting latency timer to 64
    [ 6.161940] r8169 0000:02:00.0: irq 2300 for MSI/MSI-X
    [ 6.162425] eth0: RTL8168b/8111b at 0xf7c74000, 00:1e:90:b3:99:b2, XID 38000000 IRQ 2300
    [ 6.958626] PM: Starting manual resume from disk
    [ 6.958629] PM: Resume from partition 8:6
    [ 6.958631] PM: Checking hibernation image.
    [ 6.958771] PM: Resume from disk failed.
    [ 6.989945] kjournald starting. Commit interval 5 seconds
    [ 6.989955] EXT3-fs: mounted filesystem with ordered data mode.
    [ 11.557843] udev: starting version 141
    [ 11.971913] piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0
    [ 12.106422] input: PC Speaker as /devices/platform/pcspkr/input/input4
    [ 12.140341] Linux agpgart interface v0.103
    [ 12.274488] synaptics was reset on resume, see synaptics_resume_reset if you have trouble on resume
    [ 12.914921] HDA Intel 0000:00:14.2: PCI INT A -> GSI 16 (level, low) -> IRQ 16
    [ 12.915144] psmouse serio1: ID: 10 00 64hda_codec: Unknown model for ALC883, trying auto-probe from BIOS…
    [ 13.608700] input: ImPS/2 Generic Wheel Mouse as /devices/platform/i8042/serio1/input/input5
    [ 14.791863] lp: driver loaded but no devices found
    [ 14.859297] Adding 9767480k swap on /dev/sda6. Priority:-1 extents:1 across:9767480k
    [ 15.391499] EXT3 FS on sda5, internal journal
    [ 16.336253] type=1505 audit(1257581838.822:2): operation=”profile_load” name=”/usr/share/gdm/guest-session/Xsession” name2=”default” pid=2036
    [ 16.377524] type=1505 audit(1257581838.866:3): operation=”profile_load” name=”/sbin/dhclient-script” name2=”default” pid=2040
    [ 16.377660] type=1505 audit(1257581838.866:4): operation=”profile_load” name=”/sbin/dhclient3″ name2=”default” pid=2040
    [ 16.377702] type=1505 audit(1257581838.866:5): operation=”profile_load” name=”/usr/lib/NetworkManager/nm-dhcp-client.action” name2=”default” pid=2040
    [ 16.377745] type=1505 audit(1257581838.866:6): operation=”profile_load” name=”/usr/lib/connman/scripts/dhclient-script” name2=”default” pid=2040
    [ 16.408798] type=1505 audit(1257581838.898:7): operation=”profile_load” name=”/usr/bin/freshclam” name2=”default” pid=2045
    [ 16.526321] type=1505 audit(1257581839.014:8): operation=”profile_load” name=”/usr/lib/cups/backend/cups-pdf” name2=”default” pid=2049
    [ 16.526519] type=1505 audit(1257581839.014:9): operation=”profile_load” name=”/usr/sbin/cupsd” name2=”default” pid=2049
    [ 16.551187] type=1505 audit(1257581839.038:10): operation=”profile_load” name=”/usr/sbin/tcpdump” name2=”default” pid=2053
    [ 20.426696] vboxdrv: Trying to deactivate the NMI watchdog permanently…
    [ 20.426700] vboxdrv: Successfully done.
    [ 20.426701] vboxdrv: Found 2 processor cores.
    [ 20.426777] vboxdrv: fAsync=1 offMin=0x1d3db9 offMax=0x1d3db9
    [ 20.426825] vboxdrv: TSC mode is ‘asynchronous’, kernel timer mode is ‘normal’.
    [ 20.426827] vboxdrv: Successfully loaded version 2.1.4_OSE (interface 0x000a0009).
    [ 21.609289] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
    [ 21.609293] Bluetooth: BNEP filters: protocol multicast
    [ 21.623949] Bridge firewalling registered
    [ 22.749331] pci 0000:01:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
    [ 22.925197] [drm] Initialized drm 1.1.0 20060810
    [ 22.936072] pci 0000:01:00.0: setting latency timer to 64
    [ 22.936229] [drm] Initialized radeon 1.29.0 20080528 on minor 0
    [ 22.945406] ppdev: user-space parallel port driver
    [ 23.332451] [drm] Setting GART location based on new memory map
    [ 23.332918] [drm] Loading R500 Microcode
    [ 23.332946] [drm] Num pipes: 1
    [ 23.332953] [drm] writeback test succeeded in 1 usecs
    [ 26.511640] r8169: eth0: link down
    [ 26.511818] ADDRCONF(NETDEV_UP): eth0: link is not ready
    [ 60.910166] UDF-fs: No VRS found
    [ 60.923288] ISO 9660 Extensions: Microsoft Joliet Level 3
    [ 60.924161] ISO 9660 Extensions: RRIP_1991A
    [ 87.000517] Clocksource tsc unstable (delta = -68747798 ns)
    [ 705.424438] Too big adjustment 32
    [ 705.470784] Too big adjustment 32
    [ 789.498719] Too big adjustment 32
    [ 789.542788] Too big adjustment 32

    yang saya tanyakan dimana ttyUSB yang dimaksudkan ???

    Apakah tty yang dibawah ini yang dimaksud:

    [ 1.428773] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
    [ 1.429083] 00:0b: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A

    kemudian saya coba configurasijan wvdial dengan ttyS0 yang saya temukan.

    root@viktorojo-desktop:~# gedit /etc/wvdial.conf

    [Dialer smart]
    Modem = /dev/ttyS0
    Baud = 230400
    Init1 = atze0Q0v1
    Init2 = ate0q0v1
    Init3 = at
    Init4 = at+crm=1;+cmox=1;+cps=33;+cta=0
    FlowControl = CRTSCTS
    Phone = #777
    Username = smart
    Password = smart
    Ask Password = 0
    Dial Command = ATDT
    Stupid Mode = 1
    Compuserve = 0
    Idle Seconds = 300
    ISDN = 0
    Auto DNS = 1
    New PPPD = Yes

    Namun ketika saya coba koneksikan

    root@viktorojo-desktop:~# wvdial smart
    –> WvDial: Internet dialer version 1.60
    –> Initializing modem.
    –> Sending: atze0Q0v1
    –> Sending: ATQ0
    –> Re-Sending: atze0Q0v1
    –> Modem not responding.

    hingga beberapa puluh kali…

    apakah ttyS0-nya yang salah?, terus tty yang mana yang harus di gunakan???

    sekali lagi mohon bantuan kawan semuanya

    terima kasih…

    Salam…

    • Puskesmas Mekarwangi Says:

      kayaknya jangan pake modroprobe untuk mengidentifikasi modemnya, pake aja edit di splash grub. baru pake tutorial wvdial

  64. tommi Says:

    siep mas………….Ubuntu emang mantaffffffffff……..

  65. aby Says:

    Gan kenapa setelah saya update jauntyku kok malah g bisa konek?padahal dah tak lihat semua sttingannya normal g ada yang berubah. apkah setelah update kernel berubah harus setting lagi?

  66. NewMan Says:

    aku pake Ubuntu 9.10, kasus yg aku alamai tnyata utk modprobe gak bisa di menu Grub, tapi kayak di 8.10:

    sudo modprobe usbserial vendor=0X15eb product=0X0001

    (itupun huruf X harus huruf besar, bukan kecil)

    nah, tapi masih ada masalah mas, seperti ini:

    ~$ sudo wvdial smart
    –> WvDial: Internet dialer version 1.60
    –> Cannot get information for serial port.
    –> Initializing modem.
    –> Sending: AT+CRM=1; +CMUX=1; +CPS=33; +CTA=0
    –> Sending: ATQ0
    –> Re-Sending: AT+CRM=1; +CMUX=1; +CPS=33; +CTA=0
    –> Modem not responding.

    TOLONGIN donk…🙂


    coba liat settingan wvdial.conf di komentar2 diatas…
    soalnya juga saya ga menggunakan yg wvdial tapi pon,,, :)</em
    >

  67. wong ndeso Says:

    aku pake mint-8, coba:
    ~$ sudo gedit /boot/grub/menu.lst
    tapi koq ga ada isinya (kosong) ya bos.. bingung mode on..


    mint8 pake grub2 kan???
    jadi ga usah edit menu .lst lagi…
    tinggal di modprobe sama panggil menggunakan wvdial…🙂

  68. reko Says:

    bos kalo permasalah nys sepeti ini gimana boss
    Cannot open /dev/ttyUSB0: Device or resource busy

  69. ipul Says:

    untuk kernel yang sekarang memang udah ga perlu ” modprobe usbserial vendor=0x*** product=0x*** ” soalnya usbserial udah di bundel ama kernelnya ya mas.bener ga mas ??
    salam kenal ya

  70. Dedi Says:

    gan saya pake modem haier d1200p untuk dikoneksiin di jaunty,, saya sudah install wvdial dan dan saya dah ikuti petunjuk dari blog juragan ohdediku setelah saya melakukan semuanya sesuai petunjuk lalu saya dial tapi kok ga bisa ya juragan,, berikut skrinsotnya

  71. home Says:

    nice inpo kk..😛

  72. alghur0ba Says:

    aku make mint 8 dari live cd,eh tp usb sih,mungkin istilahnya live usb yo?! ngaruh ga ya,soale dah tak coba ga bisa je..


    ngaruh gan…
    soale kan kudu nyeting grub tuuh..😛

  73. agung Says:

    mas aku sudah install puppy linux 4.3.0 dan coba pake wvdial modem usb zte mf 620 udah kedetect dev/ttyusb0 seting wvdial.conf pun sudah diubah saya memakai mentari dg seting indosat durasi, pada saat dial selalu pppd nya mati dengan tulisan:

    –> WvDial: Internet dialer version 1.53

    –> Initializing modem.

    –> Sending: ATZ
    ATZ
    OK

    –> Sending: ATQ0 V1 E1 S0=0 &C1 &D2
    ATQ0 V1 E1 S0=0 &C1 &D2
    OK
    –> Modem initialized.

    –> Sending: ATDT*99#

    –> Waiting for carrier.
    ATDT*99#
    CONNECT

    –> Carrier detected. Starting PPP immediately.

    –> Starting pppd at Fri Mar 5 12:24:08 2010

    –> pid of pppd: 20373

    –> Disconnecting at Fri Mar 5 12:24:45 2010

    –> The PPP daemon has died: A modem hung up the phone (exit code = 16)

    –> man pppd explains pppd error codes in more detail.

    –> Try again and look into /var/log/messages and the wvdial and pppd man pages for more information.

    nah itu yang terjadi maksudnya bagaimana mas tolong tutorialnnya soal koneksi via wvdial saya menggunakanmosem usb zte mf 620 , mohon pencerahannya mas
    tks agung

  74. hersdyanata Says:

    kalo pake wvdial gak bisa gitu gan?
    ane pake smart dan wvdial dan sukses😀


Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s

%d bloggers like this: